Performance monitoring for engines |
With equipment monitor you can monitor a J1939 or J1708 based engine management system. This is a fast and easy way to know all about the engine during operation.
|
|
Simulation and live-recording of engine data
|
The configuration pack gives you the tool to make scans of the CANbus or J1708 data of a engine and store it on your PC for further analysis. The data can be used to create a CANbus or J1708 siganal to simulate an engine. With the graphical inspectors the engine data is shown on the PC in diagrams.
|
|
|
|
|
Extra sensors for engine measurement
|
Squarell sensor devices can easily be added to your J1939 system. Some information like temperatures, pressure or gauge data can be missing from your engine data. By adding the Squarell sensor devices this data can be measured with extra sensors. The data is made available on the J1939 CANbus.
|
|
GPS data added to engine data
|
If you have a J1939 based system and want to add a GPS signal to J1939, then the GPS to CAN is the right choice. This device makes the GPS coordinates, altitude, and GPS speed available on CANbus.
|
|
J1939/J1708-J1587/K-line
|
What ever engine data source you have, the Squarell devices can handle various types of information to translate and proces the data into the right format. The configurable devices are easy to use and have a high performance. This means an accurate and reliable source of information.
|
|
Protective (FMS) interfaces
|
If you want to read J1939 engine data without jeopardizing the J1939 CANbus of the equipment the FMS interface is the right choice. This device protects the engine CANbus and reads the data without interfering with the signal. No signals can be send to the engine CANbus. The data can translated and send to the second CANbus port of the device.
|
